Report

4BErrata and Contingencies
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Bit range 9:4 (Negotiated Link Width)in the Link Status register (offset 12h)
in the PCI Express Capability table is 1h. It cannot be in the set of values
{0x1, 0x2} for PCI Express display controllers. Assertion 7229E848-31C2-
482A-88F2-73ADA2C32B79.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 Errata 1098
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Assertion FAE18121-9177-4FB2-A081-0D04C285EFF2 Bit range 15:0
(Extended Capability ID)in the Enhanced Capability Header register (offset
0h) in the Unrecognized Enhanced Capability ID 13 table is Dh. It must be in
the range [0x0 - 0xB] as all other Capability IDs are reserved.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 Errata 1150
Failing test name
PCI Harware Compliance Test for Systems Running Windows Vista
(PCIHCT)
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Assertion 3CDD17AF-215E-4921-894F-C99434A3B3CA Bit range 31:21
(Reserved_3)in the Uncorrectable Error Mask register (offset 8h) in the
Advanced Error Reporting Capability table must be read-only and always
return 0 . Assertion FF8BC1A1-79B5-480A-9439-BF81AEDF4183 Bit 13
(Flow Control Protocol Error Severity) in the Uncorrectable Error Severity
register (offset Ch) in the Advanced Error Reporting Capability table must be
read-only and always return 1 . It was found to return 0. Assertion
461CA4DE-9266-4420-9B5F-F33622A5D02B Bit range 31:21
(Reserved_3)in the Uncorrectable Error Severity register (offset Ch) in the
Advanced Error Reporting Capability table must be read-only and always
return 0.
Additional information
(for example, test system in a
multiple system configuration)
Testing Exceptions for S5500WB12V Windows Server 2008 64 Bit
Data in this section reflects product data and test exceptions listed in section 2 of the
S5500WB12V Readme file at time of WLP First-Time submission ID Number 1323611.
Operating system Failure type
ID number
12 April 1, 2009