Report

Errata and Contingencies Intel® Server SE7320VP2
12 June 17, 2005
Testing Exceptions for Intel® Server SE7320VP2 Windows Server 2003
Data in this section reflects product data and test exceptions listed in section 2 of the Intel® Server
SE7320VP2 Readme file at time of WLP First-Time submission ID Number 904681.
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2003 Enterprise
Edition
Errata 860
Failing test name
Enable/Disable - Device I/O
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
|
ID=PCI\VEN_8086&DEV_25AA&SUBSYS_34508086&REV_02\3&267A616A&0&E9
| Friendly Name=(null)
| DevDesc=Intel(R) 6300ESB USB Universal Host Controller - 25AA
| Test Interface=(null)
| PnP
Interface=\\?\PCI#VEN_8086&DEV_25AA&SUBSYS_34508086&REV_02#3&267a616a&0
&E9#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
TEST 3 :FAIL
VARIATION 1:FAIL
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2003 Enterprise
Edition
Errata 670
Failing test name
PCI Pre-OS Tests:
PCI Configuration Header Dump test; Pcidump.log
PCI Power Management Register Interface test; Pcicap.log
Subsystem ID and Subsystem Vendor ID test; Pcisid.log
PCI Test Adapter Diagnostic test; Pmdiag.log
PME# Signal Routing test; Pcipme1.log
PME# Signal Routing - Simultaneous test; Pcipme2.log
PCI 3.3 Volt Auxiliary Power Load test; Pcivaux.log
System Wake Up test; Pciwake.log
PCI Voltage Requirement test; Pcivolt.log
PCI Voltage Requirement - 3.3 Vaux test; Pcivoltz.log
S3 Compliance test; S3test.log
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Additional information
(for example, test system in a
multiple system configuration)
PCI Pre-OS tests that use FoxFire cards are no longer required