Report

Intel® Server SE7320VP2 Errata and Contingencies
June 17, 2005 13
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2003 Enterprise
Edition
Errata 901
Failing test name
ACPI Verifier
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
| The memory range specified is in conflict with the system's E820 table.
| The E820 table says that this memory range is in the AcpiAddressRangeMemory range
| which is conflicting with the requested memory range which is
| between 0x0 - 0x9e000
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2003 Enterprise
Edition
Contingency 781
Failing test name
PCI Compliance from HCT 12 Test Kit
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
68C.7B8 : +TEST+SEV2 : FAIL: 4.55.3 - The Programming Interface
in the Class Code register must be read only.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2003 Enterprise
Edition
Errata 1306
Failing test name
PCI Compliance from HCT 12 Test Kit
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
68C.7B8 : +TEST+SEV2 : FAIL: - A PCI-X device that generates
interrupts must have an MSI or MSI-X capability.
Additional information
(for example, test system in a
multiple system configuration)
Additional Information:
The PCI Compliance errors reported in this readme.doc were run with the HCT 12 test kit per
MS instructions as the PCI Compliance test in the HCT 11.2 test kit would hang. I referred to
both the errata #1306 and incident #1320 in the above failure to make sure we were covered on
this. There is a folder located with the whqlhct.cab labeled PCI Compliance that holds the HCT 12
test and logs.