Report

4BErrata and Contingencies Intel® Server System SR2500ALLXR
Failing test name
PCI Harware Compliance Test for Systems Running Windows Vista
(PCIHCT)
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Bit 10 (Interrupt Disable) in the Command register (offset 4h) in
the Header table must be read-writable if the device supports an
interrupt.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 Errata 316
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Bit range 15:8 (Bus Number)in the PCI-X Bridge Status register
(offset 4h) in the PCI-X Capability table must be read-only.
RESOLUTION: The following assertion failure is allowed EBA19FF0-
AB40-4D74-AC05-4ABE22D356BD
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 Errata 317
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Header Type 1 Registers failure due to a PCI Compliance test issue
RESOLUTION: The following assertion failure is allowed
60BDF3F8-01D2-4B58-8A14-04DA4C1B694A
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 Errata 1115
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
PCI Compliance - Bit 3 (Read Completion Boundary) in the Link
Control register (offset 10h) in the PCI Express Capability table
must be read-only and always return 0 for switch ports.
RESOLUTION: The following PCI Compliance assertion failure is
allowed 9A275B03-1072-43D6-B034-3DD306D24324
12 May 19, 2008