Report

Errata and Contingencies Intel® Server SE7221BK1LX
12 February 14, 2005
Testing Exceptions for Intel® Server SE7221BK1LX Windows Server 2003
Data in this section reflects product data and test exceptions listed in section 2 of the Intel® Server
SE7221BK1LX Readme file at time of WLP First-Time submission ID Number 942542.
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2003 EE Errata 670
Failing test name
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
PCI Pre-OS Tests:
PCI Configuration Header Dump test; Pcidump.log
PCI Power Management Register Interface test; Pcicap.log
Subsystem ID and Subsystem Vendor ID test; Pcisid.log
PCI Test Adapter Diagnostic test; Pmdiag.log
PME# Signal Routing test; Pcipme1.log
PME# Signal Routing - Simultaneous test; Pcipme2.log
PCI 3.3 Volt Auxiliary Power Load test; Pcivaux.log
System Wake Up test; Pciwake.log
PCI Voltage Requirement test; Pcivolt.log
PCI Voltage Requirement - 3.3 Vaux test; Pcivoltz.log
S3 Compliance test; S3test.log
Additional information
(for example, test system in a
multiple system configuration)
PCI Pre-OS tests that use FoxFire cards are no longer required
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2003 EE Errata 860
Failing test name
Enable/Disable – Device I/O
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
|ID=PCI\VEN_8086&DEV_2658&SUBSYS_34448086&REV_03\3&11583659&0&E8
|Friendly Name=(null)
|Status=25175040 Prob=22
|Status=DN_HAS_PROBLEM,DN_DISABLEABLE,DN_NT_ENUMERATOR,DN_NT_DRIV
ER,
|Prob=CM_PROB_DISABLED
TEST 2 :FAIL
Additional information
(for example, test system in a
multiple system configuration)
Enable/Disable – Device I/O test fails on USB 2.0 host controllers