Report
4BErrata and Contingencies IntelĀ® Server System SR2500ALBRPR
16 May 13, 2008
Windows Server 2008 Errata 563
Failing test name
Signed Driver Check
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Chklogo6 may fail when the device under test uses muiltiple
drivers
ERROR: Test was unable to match this device ID with the device
ID of the device for which Error: this driver file was tested with
this driver file was tested with.
Additional information
(for example, test system in a
multiple system configuration)
Testing Exceptions for S5000PALR-SATA Windows Server 2008 x64
Data in this section reflects product data and test exceptions listed in section 2 of the IntelĀ® Server System
SR2500ALBRPR Readme file at time of WLP First-Time submission ID Number 12906
18.
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 x64 Errata 1110
Failing test name
BitLocker Drive Encryption BIOS Interface Logo Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
For platforms without Trusted Platform Modules (TPM), the WLK
1.1 kit has an issue which randomly causes the BitLocker Drive
Encryption BIOS Interface Logo Test to fail.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 x64 Errata 887
Failing test name
PCI Harware Compliance Test for Systems Running Windows Vista
(PCIHCT)
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Bit 10 (Interrupt Disable) in the Command register (offset 4h) in
the Header table must be read-writable if the device supports an
interrupt.