Report

4BErrata and Contingencies Intel® Server System SR2500ALBRPR
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
PCI Compliance test causes the system to hang after testing Power
Management capability of the graphics devices. This occurs after
the device are put into various D-states and then recovered to D0
state. Cause: The AMD/ATI graphics devices require that the
VBIOS be re-posted after transition to various D-states and
recovery to D0 state which the PCIHCT doesn't do.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 x64 Errata 1113
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Bit 5 (Retrain Link) in the Link Control register (offset 10h) in the
PCI Express Capability table must always return 0 on reads even
though it is read-write.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 x64 Errata 1115
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
PCI Compliance - Bit 3 (Read Completion Boundary) in the Link
Control register (offset 10h) in the PCI Express Capability table
must be read-only and always return 0 for switch ports.
RESOLUTION: The following PCI Compliance assertion failure is
allowed 9A275B03-1072-43D6-B034-3DD306D24324
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 x64 Errata 1114
Failing test name
PCI Hardware Compliance Test
20 May 13, 2008