Report

Errata and Contingencies Intel® Server Board SE7500CW2
12 8/24/2003
Testing Exceptions for Intel® Server Board SE7500CW2 Windows 2000
Update Submission
Data in this section reflects product data and test exceptions listed in section 2 of the Intel® Server
Board SE7500CW2 Readme file at time of WLP Update submission ID 672143.
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2000 Errata 349
Failing test name
ACPI Stress
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Errata Title: ACPI Stress Test Sleep State and Hibernation Failures for Servers
Log File: acpitest3.log
Problem:
In accordance with the Windows Logo Program for Hardware requirements, servers
are not required to support sleep states or hibernation (see the Hardware Design
Guide, version 2.0, chapter 2, section 8 for details). However, if the test server
supports sleep states or hibernation, the server is required to pass the ACPI Stress
test. If the test server does not support power management, the following error will
appear in Acpitest.log:
728.564 : +VAR+ 1 : Parameter block 1
728.564 : +VAR+SEV1 1 : Sleep not supported in this system
728.564 : +VAR+ 2 : Parameter block 2
728.564 : +VAR+SEV1 2 : Hibernation not supported in this system
Solution:
This is an acceptable failure for the SE7500CW2 based server since the
SE7500CW2 server board meets all ACPI requirements for basic and advanced
servers. Note servers are not required to support ACPI sleep states. Refer to Errata
349 for details of above acceptable failure.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2000 Errata 403
Failing test name
PCI 2.1(Cards) Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Errata Title: PCI 2.2 compliance test and PCI 2.1 Cards test extended capabilities
error
Log File: pcitest2.log
Problem:
Systems that include integrated core chipsets in the southbridge (for example IDE,
USB) may fail the PCI 2.2 Compliance test and the PCI 2.1 Cards test with the
following extended capabilities failures:
ERROR: Extended capabilities not supported on this device
Solution:
The issue described above is an acceptable failure. Refer to Errata 403 for details of
above acceptable failure.
Additional information
(for example, test system in a
multiple system configuration)