Report

Errata and Contingencies Intel® Server Board SE7500CW2
14 8/24/2003
Testing Exceptions for Intel® Server Board SE7500CW2 First Time
Submission
Data in this section reflects product data and test exceptions listed in section 2 of the Intel® Server
Board SE7500CW2 Readme file at time of WLP First-Time submission ID 625430.
Operating system
(Windows* XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2000 Errata 298
Failing test name
PCI Power Management Register Interface
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Errata Title: PCI Power Management Register Interface Test: False Failure
Log File: pcicap.log
Problem: Following acceptable error occurs in the PCICAP log file:
<<< PCI Test Assertion : 4.4.2 >>>
PowerState field in PMCSR register is read/write.
PowerState field in PMCSR register is not writable.
-- FAILURE [pmcsr.c:]
<<< FAILED 4.4.2 >>>
Solution: This is an acceptable failure per Errata 298. Refer to errata 298
for additional details of above acceptable failure.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2000 Errata 349
Failing test name
ACPI Stress
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Errata Title: ACPI Stress Test Sleep State and Hibernation Failures for Servers
Log File: acpitest.log
Problem:
In accordance with the Windows Logo Program for Hardware requirements, servers
are not required to support sleep states or hibernation (see the Hardware Design
Guide, version 2.0, chapter 2, section 8 for details). However, if the test server
supports sleep states or hibernation, the server is required to pass the ACPI Stress
test. If the test server does not support power management, the following error will
appear in Acpitest.log:
728.564 : +VAR+ 1 : Parameter block 1
728.564 : +VAR+SEV1 1 : Sleep not supported in this system
728.564 : +VAR+ 2 : Parameter block 2
728.564 : +VAR+SEV1 2 : Hibernation not supported in this system
Solution:
This is an acceptable failure for the SE7500CW2 based server since the
SE7500CW2 server board meets all ACPI requirements for basic and advanced
servers. Note servers are not required to support ACPI sleep states. Refer to Errata
349 for details of above acceptable failure.
Additional information
(for example, test system in a
multiple system configuration)