Report

S5000PSLSATAR Errata and Contingencies
Testing Exceptions for S5000PSLSATAR Windows Server 2008
Data in this section reflects product data and test exceptions listed in section 2 of the S5000PSLSATAR
Readme file at time of WLP First-Time submission ID Number 1286321.
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 x86 Errata 1110
Failing test name
BitLocker Drive Encryption BIOS Interface Logo Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
For platforms without Trusted Platform Modules (TPM), the WLK
1.1 kit has an issue which randomly causes the BitLocker Drive
Encryption BIOS Interface Logo Test to fail.
Additional information
(for example, test system in a
multiple system configuration)
Failure type
(Contingency, Errata, Incident)
ID number
Operating system
(Windows XP, Windows 2000, etc.)
Windows Server 2008 x86 Errata 887
Failing test name
PCI Harware Compliance Test for Systems Running Windows Vista
(PCIHCT)
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Bit 10 (Interrupt Disable) in the Command register (offset 4h) in
the Header table must be read-writable if the device supports an
interrupt.
Additional information
(for example, test system in a
multiple system configuration)
Failure type
(Contingency, Errata, Incident)
ID number
Operating system
(Windows XP, Windows 2000, etc.)
Windows Server 2008 x86 Errata 316
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Bit range 15:8 (Bus Number)in the PCI-X Bridge Status register
(offset 4h) in the PCI-X Capability table must be read-only.
RESOLUTION: The following assertion failure is allowed
EBA19FF0-AB40-4D74-AC05-4ABE22D356BD
April 3, 2008 11