Report

Errata and Contingencies S5000PSLSATAR
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 x64 Errata 474
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
According to the PCI Express Base Specification, Rev 2.0 Section
7.8.8, this bit field is undefined when the link is not up. If there is
not PCIe device behind the bridge, then the link can NOT be up
and therefore the field is undefined. Bit 13 in the same register
(Link Status) can be used to determine if the link is active (up).
The PCIHCT uses the Presence Detect State bit of the Slot Status
register to determine whether a child device is present. However,
the Presence Detect State bit only returns valid data if the Slot
Implemented bit is set (bit 8 of PCIe capabilities register). If the
PCIe root port or downstream port will never have a device behind
it, the Slot Implemented bit is cleared to 0. Per the spec, PDS will
always be 1 when the Slot Implemented bit is clear. Therefore PDS
can not be used to determine device presence when the SI bit is
clear.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 x64 Errata 1029
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Assertion 4BA8F23A-6BB1-48EE-88D8-ED1A3ECD34B9 SSVID
register of the Subsystem ID and Subsystem Vendor ID Capability
table must be read-only . Assertion 6B0F606E-DBB3-4B8C-8879-
32B302412EB8 SSID register of the Subsystem ID and Subsystem
Vendor ID Capability table must be read-only . Assertion
B576282C-5C66-4253-A275-257F5D49EFEF SSVID register of the
Subsystem ID and Subsystem Vendor ID Capability table cannot
have a value of 0h. These are valid failures but are not a
requirement till January 2009. A filter is being created for the
above assertions for this particular device. Added failure: Assertion
7A5587BC-5646-4DC4-9A5D-22F85AB2204E PCI Express ports
and bridges must implement Subsystem ID and Subsystem Vendor
ID Capability.
18 April 3, 2008