Report

Errata and Contingencies S7000FC4URE-IR-IR
16 June 24, 2008
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
According to the PCI Express Base Specification, Rev 2.0 Section
7.8.8, this bit field is undefined when the link is not up. If there is
not PCIe device behind the bridge, then the link can NOT be up
and therefore the field is undefined. Bit 13 in the same register
(Link Status) can be used to determine if the link is active (up).
The PCIHCT uses the Presence Detect State bit of the Slot Status
register to determine whether a child device is present. However,
the Presence Detect State bit only returns valid data if the Slot
Implemented bit is set (bit 8 of PCIe capabilities register). If the
PCIe root port or downstream port will never have a device behind
it, the Slot Implemented bit is cleared to 0. Per the spec, PDS will
always be 1 when the Slot Implemented bit is clear. Therefore PDS
can not be used to determine device presence when the SI bit is
clear.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 Errata 1141
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Assertion 5FC5B29C-0F24-423B-856A-87C9E31C6802 Bit 14
(Completion Timeout Mask) in the Uncorrectable Error Mask
register (offset 8h) in the Advanced Error Reporting Capability
table must be read-writable . Assertion 908C881D-29ED-4B57-
A1A6-BE1DBD45522E Bit 14 (Completion Timeout Error Severity)
in the Uncorrectable Error Severity register (offset Ch) in the
Advanced Error Reporting Capability table must be read-writable.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 Errata 1053
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Assertion C1DA87B7-13A0-41C0-9184-2E8FEBBFD61E Bit range
14:7 (Slot Power Limit Value) in the Slot Capabilities register
(offset 14h) in the PCI Express Capability table must be read-only.
Assertion AA3CC9C9-BE45-4213-AB5A-67DA669F7019 Bit range
16:15 (Slot Power Limit Scale) in the Slot Capabilities register
(offset 14h) in the PCI Express Capability table must be read-only.