Report

4BErrata and Contingencies Intel® Server System SR2520SAFR
10 May 9, 2008
All testing exceptions must be identified with a valid Errata ID, Incident ID, or Contingency ID
provided by WHQL. The new Microsoft standardized Readme file is available for download at:
http://www.microsoft.com/whdc/winlogo/WLK/default.mspx
Testing Exceptions for Intel® Server System SR2520SAFR Windows Server
r
System SR2520SAFR Readme file at time of WLP First-Time submission ID Number 1289848.
etc.)
gency, Errata, Incident)
ID number
2008
Data in this section reflects product data and test exceptions listed in section 2 of the Intel® Serve
Operating system
(Windows XP, Windows 2000,
Failure type
(Contin
Windows Server 2008 x86 1029 Errata
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is e xcessive or if
there is no text)
ot
st implement Subsystem ID and Subsystem Vendor
Capability.
Assertion 4BA8F23A-6BB1-48EE-88D8-ED1A3ECD34B9 SSVID
register of the Subsystem ID and Subsystem Vendor ID Capability
table must be read-only . Assertion 6B0F606E-DBB3-4B8C-8879-
32B302412EB8 SSID register of the Subsystem ID and Subsystem
Vendor ID Capability table must be read-only . Assertion
B576282C-5C66-4253-A275-257F5D49EFEF SSVID register of the
Subsystem ID and Subsystem Vendor ID Capability table cann
have a value of 0h. These are valid failures but are not a
requirement till January 2009. A filter is being created for the
above assertions for this particular device. Added failure: Assertion
7A5587BC-5646-4DC4-9A5D-22F85AB2204E PCI Express ports
and bridges mu
ID
Additional information
(for example, test system in a
multiple system configuration)
etc.)
gency, Errata, Incident)
ID number
Operating system
(Windows XP, Windows 2000,
Failure type
(Contin
Windows Server 2008 x86 1078 Errata
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is e xcessive or if
there is no text)
Error
Advanced Errror Reporting Capability table is not
plemented
The Bit 5 (Surprise Down Error Severity) in the Uncorrectable
Severity register (offset Ch) in the Advanced Error Reporting
Capability table must be read-only and always return 1 if the Bit 5
(Surprise Down Error Mask) in the Uncorrectable Error Mask
Register in the
im