Report

IntelĀ® Server System SR2520SAFR 4BErrata and Contingencies
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
PCI Compliance - Bit 3 (Read Completion Boundary) in the Link
Control register (offset 10h) in the PCI Express Capability table
must be read-only and always return 0 for switch ports.
RESOLUTION: The following PCI Compliance assertion failure is
allowed 9A275B03-1072-43D6-B034-3DD306D24324
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 x64 Errata 331
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
PCI Compliance - Bit range 31:2 (Message Address)in the Message
Address register (offset 4h) in the MSI Capability table must be
read-writable. RESOLUTION: The following PCI Compliance test
assertion failure is allowed DDC8A893-6F85-4D69-BC79-
874BA52E0A02.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 x64 Errata 1080
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
PCI Compliance test causes the system to hang after testing Power
Management capability of the graphics devices. This occurs after
the device are put into various D-states and then recovered to D0
state. Cause: The AMD/ATI graphics devices require that the
VBIOS be re-posted after transition to various D-states and
recovery to D0 state which the PCIHCT doesn't do.
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 x64 Errata 566
Failing test name
PCI Hardware Compliance Test
May 9, 2008 17