AXXRSBBU3 (Li-Ion battery pack)installation guide

Intel
®
RAID Smart Battery AXXRSBBU3 Installation Guide 5
Connecting the Clamshell to the Chassis
The Intel
®
RAID Smart Battery AXXRSBBU3 is designed for easy attachment to either
an Intel
®
pedestal or rack mount chassis. Follow the appropriate instructions below for
your server.
If you are installing this component into a third-party chassis, you will first need to install
an attachment mechanism, such as industrial-grade Velcro*. Refer to your server chassis
documentation or discuss an appropriate attachment mechanism with your server chassis
manufacturer to ensure that the attachment mechanism complies with the chassis
requirements.
Intel
®
Server Chassis SC5400, Intel
®
Server Chassis SC5600, Intel
®
Server Chassis SC5650,
Intel
®
Server Systems SR1600UR, SR1625UR, SR2600UR and SR2625UR with Intel
®
Integrated RAID Controller SROMBSASMR, Intel
®
Server Systems SR4850HW4,
SR6850HW4, SR4850HW4/M, and SR6850HW4/M
1. Locate the installation clips inside the chassis. They are on the left side of the chassis,
near the rear. Remove the mylar pad if there is a mylar pad covering the mounting
hole.
2. Align the tabs on the clamshell with the clips on the chassis (see Figure 2).
Figure 2. Aligning Clamshell Tabs to the Chassis Clips
3. Slide the clamshell toward the front of the system until the tabs engage with the clips
in the chassis (see Figure 3).