Command Line Tool 2 User Guide

AdpAliLog
Description
Displays information about specified RAID controller
Syntax
CmdTool2 -AdpAliLog -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
Example
CmdTool2 -AdpAliLog -a0
AdpAutoRbld
Description
Enable or disable auto rebuild if hot spare is enabled. This command also determines whether drive
insertion will cause an autostart rebuild.
Syntax
CmdTool2 -AdpAutoRbld -Enbl | -Dsbl | -Dsply -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-Enbl: Enable auto rebuilds
-Dsbl: Disable auto rebuilds
-Dsply: Display the current setting
Example
CmdTool2 -AdpAutoRbld -Enbl -a1
CmdTool2 -AdpAutoRbld -Dsbl -a1,2