Command Line Tool 2 User Guide

AdpCcSched
Description
Schedule a Consistency Check
Syntax
CmdTool2 -AdpCcSched -Dsbl | -Info| { -ModeConc | -ModeSeq [-ExcludeLD -L[drive]] [-
SetStartTime yyyymmdd hh ] [-SetDelay val ] } -a[controller]
Parameters
Dsbl: Disables a scheduled CC for the given adapter(s).
Info: Gets information about a scheduled CC for the given adapter(s).
ModeConc: The scheduled CC on all of the virtual drives runs concurrently for the given adapter(s).
ModeSeq: The scheduled CC on all of the virtual drives runs sequentially for the given adapter(s)
ExcludeLd: Specify the virtual drive numbers not included in the scheduled CC. The new list will
overwrite the existing list stored on the controller. This is optional.
StartTime: Sets the next start time. The date is in the format of yyyymmdd in decimal digits and
followed by a decimal number for the hour between 0 ~ 23 inclusively. This is optional.
SetDelay: Sets the execution delay between executions for the given adapter(s). This is optional.
Val: The value is the length of delay in hours. A value of 0 means continuous execution.
Example
CmdTool2 -AdpCcSched -info -a1
CmdTool2 -AdpCcSched -SetDelay 1 -a1
AdpCount
Description
Display the number of RAID controllers.
Syntax
CmdTool2 -AdpCount