Command Line Tool 2 User Guide

Intel
®
RAID Controller Command Line Tool 2 User Guide
Parameters
None
Example
CmdTool2 -AdpCount
AdpDiag
Description
Run diagnostics on a RAID controller.
Syntax
CmdTool2 -AdpDiag [val] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-val: Indicates the time in seconds for the controller diagnostic to run.
Example
CmdTool2 -AdpDiag -aALL
AdpEventLog
Description
Display settings for the event log and BBU terminal log, which are kept at the firmware level.
Syntax
CmdTool2-AdpEventLogInfo Clear | GetEventLogInfo | GetEvents {-info -warning -
critical -fatal) | GetSinceShutdown {-info -warning -critical -fatal) |
GetSinceReboot {-info -warning -critical -fatal) | IncludeDeleted {-info -warning
-critical -fatal) | GetLatest <number> {-info -warning -critical -fatal) -f
<filename> | GetCCIncon -f [filename] -L[drive] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-Clear: Clear the event log