Command Line Tool 2 User Guide

Intel
®
RAID Controller Command Line Tool 2 User Guide
Syntax
CmdTool2 -AdpFwFlash -f [filename] {-NoSigChk} {-NoVerChk} -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-NoSigChk: Do not check the firmware’s signature
-NoVerChk: Do not check the firmware file version
-f [filename]: The name of the firmware file for the flash update.
Example
CmdTool2 -AdpFwFlash -f FlashUpdt -a1
AdpGetConnectorMode
Description
Show the connector mode.
Syntax
CmdTool2 -AdpGetConnectorMode -Connector** -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-Connector**: Specified connecotr ID
Example
CmdTool2 -AdpGetConnectorMode -ConnectorAll -a0
AdpGetProp
Description
Display the properties of a RAID controller.
Syntax
CmdTool2 -AdpGetProp -[parameter(s)] -a[controller]