Command Line Tool 2 User Guide

AdpSetConnectorMode
Description
Choose to use the internal or external connector on a RAID controller.
Syntax
CmdTool2 -AdpSetConnectorMode -Internal | -External -Connector**
-a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-Internal: Use the internal connector on the RAID controller
-External: Use the external connector on the RAID controller
-Connector**: Specified connecotr ID
Example
CmdTool2 -AdpSetConnectorMode -Internal -a1
AdpSetProp
Description
Set RAID controller properties.
Syntax
CmdTool2 -AdpSetProp -[parameter(s)] -val -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-[parameter(s)]: See the following list of allowed parameters:
CacheFlushInterval: Cache flush interval in seconds. Values: 0 to 255.
RebuildRate: Rebuild rate. Values: 0 to 100.
PatrolReadRate: Patrol read rate. Values: 0 to 100.
BgiRate: Background initilization rate. Values: 0 to 100.