Command Line Tool 2 User Guide

uppercase letter, and one non-alphanumeric character (e.g. < > @ +). The space character is not
permitted.
-KeyID kkkkkkkkkkk: Enters the security key ID. The key ID displays when you have to enter a
security key. If you have multiple security keys, the security key ID helps you determine which
security key to enter.
Example
CmdTool2 -CreateSecurityKey -SecurityKey p@ssw0rd -a1
DestroySecurityKey
Description
Destroy the security key
Syntax
CmdTool2 -DestroySecurityKey | [-Force] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
Example
CmdTool2 -DestroySecurityKey -Force -a1
DirectPdMapping
Description
Set the mapping mode of the drives to the selected controllers.
Syntax
CmdTool2 -DirectPdMapping -Enbl|-Dsbl|-Dsply -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
Enbl: Enables the direct physical drive mapping mode.