Command Line Tool 2 User Guide

Intel
®
RAID Controller Command Line Tool 2 User Guide
LDBBMClr
Description
Clear the LDBBM Talbe Entries
Syntax
CmdTool2 -LDBBMClr -L[drive] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-L[drive]: The drive(s) affected by the command
Example
CmdTool2 -LDBBMClr -L1 -a1
LDCC
Description
Starts or stops the consistency check per array for each RAID controller.
Syntax
CmdTool2 -LDCC -Start | -Abort | -ShowProg | -ProgDsply -L[drive]
-a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-L[drive]: The drive(s) affected by the command
-Start: Starts a consistency check on the logical drive(s), and then displays the progress/time left
-Abort: Aborts a consistency check on the logical drive(s)
-ShowProg: Displays a snapshot of an ongoing consistency check
-ProgDsply: Displays progress until at least one consistency check is completed or until a key is
pressed