Command Line Tool 2 User Guide

Example
CmdTool2 -LDCC -ProgDsply -L2 -a1
LDMakeSecure
Description
Secure data on a virtual drive
Syntax
CmdTool2 -LDMakeSecure -L[drive] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-L[drive]: The drive(s) affected by the command
Example
CmdTool2 -LDMakeSecure -L2 -a1
LdExpansion
Description
This command is used to expand the virtual drive .
Syntax
CmdTool2 -LdExpansion -pN -dontExpandArray -L[drive] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-L[drive]: The drive(s) affected by the command
-pN: Denotes the percentage of the array to use to expand the virtual drive. N ranges from 0 to
100 percent. For example, -p30 indicates expansion up to 30 percent of available array size.
-dontExpandArray: Expand a virtual drive within the array, even when there is room to
expand the array.