Command Line Tool 2 User Guide

Example
CmdTool2 -LDGetProp -Cache -Access -l2
LDInfo
Description
Displays information about the virtual drive(s) on the selected controller(s).
Syntax
CmdTool2 -LDInfo -L[drive] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-L[drive]: The drive(s) affected by the command
Example
CmdTool2 -LDInfo -l2 -a1
LDInit
Description
Start, stop, or show the progress of an array initialization.
Syntax
CmdTool2 -LDInit { -Start [Fast|Full]} | -Abort | -ShowProg | -ProgDsply
-L[drive] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-Start [-full]: Writes 0s, optional progress display (fast init displays the first 100 Mbs, and
full initializes the entire logical drive)
-Abort: Aborts the ongoing initialization
-ShowProg: Displays the snapshot of the ongoing initialization
-ProgDsply: Displays initialization progress until at least one is completed or a key is pressed