Command Line Tool 2 User Guide

Intel
®
RAID Controller Command Line Tool 2 User Guide
Example
CmdTool2 -LDSetProp -RW WB NORA Direct -DisDskCache CachedBadBBU -L0 -a0
PdFwDownload
Description
Flashes the firmware with the file specified.
Syntax
cmdTool2 -PdFwDownload -PhysDrv[E0:S0,E1:S1,...] -f [filename] -
a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-PhysDrv[E0:S0,E1:S1,...]: The physical drive(s) affected
Example
cmdTool2 -PdFwDownload -physDrv[252:0] -a1
PDClear
Description
Manage a drive initialization
Syntax
CmdTool2 -PDClear -Start | -Stop | -ShowProg | -ProgDsply -PhysDrv
[E0:S0,E1:S1,...] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-Physdrv[E0:S0,...]: The physical drive(s) affected
-Start: Start initialization on the selected drive
-Stop: Stop initialization on the selected drive