Command Line Tool 2 User Guide

-ShowProg: Displays a snapshot of the ongoing initialization process
-ProgDsply: Displays the initialization progress until completion or until a key is pressed
Example
CmdTool2 -PDClear -Stop -PhysDrv[252:0] -a0
PDCpyBk
Description
Perform the Copyback Operation on the Selected Drive
Syntax
CmdTool2 -PDCpyBk -Start | -Stop|-ShowProg|-ProgDsply -PhysDrv[E0:S0] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
Start: Initializes the copyback operation on the selected drive.
Stop: Stops the copyback operation on the selected drive.
ShowProg: Displays a snapshot of the ongoing copyback operation.
ProgDsply: Allows you to view the ongoing copyback operation. The routine continues to display
progress until at least one copyback is completed or a key is pressed.
Example
CmdTool2 -PDCpyBk -Start -Physdrv[252,0] -a1
PDGetMissing
Description
Display Drives in Missing Status.
Syntax
CmdTool2 -PDGetMissing -a[controller]