Command Line Tool 2 User Guide

Intel
®
RAID Controller Command Line Tool 2 User Guide
Parameters
-a[controller]: The RAID controller affected by the command
Example
CmdTool2 -PDGetMissing -a1
PDGetNum
Description
Lists the number of physical drives either attached directly to the RAID controller or in enclosures
attached to the RAID controller.
Syntax
CmdTool2 -PDGetNum -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
Example
CmdTool2 -PDGetNum -a1
PDHSP
Description
Converts a physical drive into a global or dedicated hot spare in the listed array or removes the hot
spare. Make sure the capacity of the hot-spare drive is equal to or larger than the capacity of the
disks in the array and that it is the same type of drive (SAS or SATA).
Syntax
CmdTool2 -PDHSP {-Set [-Dedicated [-ArrayN | -Array0,1,2...]]
[-EnclAffinity] [-nonRevertible]} | -Rmv -PhysDrv[E0:S0,E1:S1,...]
-a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-PhysDrv[E0:S0,E1:S1,...]: The physical drive(s) affected