Command Line Tool 2 User Guide

-Set: Changes the drive state to dedicated hot spare for the enclosure.
-Dedicated: Set the spare to a specified array
-ArrayN: Specified array by the array ID
-EnclAffinity: Set the spare for a specific enclosure’s array
-nonRevertible: Put the spare in non-revertible mode
-Rmv: Changes the physical drive state to ready (removes the hot spare)
Example
CmdTool2 -PDHSP -Set -PhysDrv[252,0] -a0
PDInfo
Description
Shows the drive size, type, serial number, and firmware version for the physical drives connected to
the enclosure and RAID controller.
Syntax
CmdTool2 -PDInfo -PhysDrv[E0:S0,E1:S1,...] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-PhysDrv[E0:S0,E1:S1,...]: The physical drive(s) affected
Example
CmdTool2 -PDInfo -PhysDrv[252,0] -a0
PDInstantSecureErase
Description
Use instant secure erase on a physical drive to erase data on SED drives.
Syntax
CmdTool2 -PDInstantSecureErase -PhysDrv[E0:S0,...] | [-Force] -a[controller]