Command Line Tool 2 User Guide

Intel
®
RAID Controller Command Line Tool 2 User Guide
Parameters
-a[controller]: The RAID controller affected by the command
-PhysDrv[E0:S0,...]: Specifies the drive(s) that you want to perform the Instant Secure Erase on.
Example
CmdTool2 -PDInstantSecureErase -PhysDrv[252,0] -Force -a1
PDList
Description
Displays the size, type, serial number, and firmware version for all physical drives attached to a
RAID controller.
Syntax
CmdTool2 -PDList -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
Example
CmdTool2 -PDList -a1
PDLocate
Description
Starts and stops flashing the disk activity LED for a drive.
Syntax
CmdTool2 -PDLocate -physdrv[E0:S0,E1:S1,...]
-a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-physdrv[E0:S0,E1:S1,...]: The drive for the affected LED