Command Line Tool 2 User Guide

Intel
®
RAID Controller Command Line Tool 2 User Guide
PDOffline
Description
Sets the drive state to offline.
Syntax
CmdTool2 -PDOffline -PhysDrv[E0:S....] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-PhysDrv[E0:S....]: The physical drive(s) affected
Example
CmdTool2 -PDOffline -PhysDrv[252,0] -a0
PDOnline
Description
Sets the drive state to online
Syntax
CmdTool2 -PDOnline -PhysDrv[E0:Sn....] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-PhysDrv[E0:Sn....]: The physical drive(s) affected
Example
CmdTool2 -PDOnline -PhysDrv[252,0] -a0