Command Line Tool 2 User Guide

Contents
iv
 Force: Specifies that The Intel
®
RAID Controller Command Line Tool 2 utility does not ask
you for confirmation before it performs this command. You might lose data using this option
with some commands.
 Silent (no messages)
 The AppLogFile filename command saves the command log into specified file
 The Nolog command disables the option to save the command log
Manual Organization
 Chapter 1 provides a list of commands by function. The command syntax is not complete in
this chapter. When you find the command you need to use, see the alphabetical list of
commands in Chapter 2 for the correct syntax.
 Chapter 2 provides an alphabetical list of commands with the full syntax and command usage.
Pre-boot Command Line
A second command line utility, known as Pre-boot command line tool (PCLI), is available. You can
enter this utility during bootup. PCLI gives you an alternative way to access the CLI utility.
To access PCLI, while the host computer is booting, press the hot key <Ctrl> + <Y> when the
following text appears on the screen:
Press <Ctrl><Y> for Preboot CLI
The following commands that are in the regular Intel
®
RAID Controller Command Line Tool 2 are
not available in PCLI:
 AdpSetVerify
 AdpCcSchedAdpDiag
 AdpBatTest
 Option ProgDsplyCfgSave
 CfgRestore
 AdpBbuCmd
 AdpFacDefSet
 AdpFwFlash
 AdpGetConnectorMode
 AdpSetConnectorMode
 DirectPdMapping
 ShowEnclList
 ShowVpd
 EnclLocate
 PdFwDownload
 SetFacDefault
 PDCpyBk
 AdpFwDump
 Snapshot
Enbl/Setprop/Dsbl/TakeSnapshot/DeleteSnapshot/CreateView/DeleteView/Info/Clean/Get
ViewInfo
 AdpSetProp DefaultSnapshotSpace/DefaultViewSpace/AutoSnapshotSpace