Command Line Tool 2 User Guide

Intel
®
RAID Controller Command Line Tool 2 User Guide
Example
CmdTool2 -PDRbld -Start -PhysDrv[252,0] -a0
PDReplaceMissing
Description
Replaces the configured physical drive, and then starts an automatic rebuild. The specified array,
index and row must be a missing drive.
Syntax
CmdTool2 -PDReplaceMissing -PhysDrv[E0:Sn] -ArrayX -RowY -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-PhysDrv[E0:Sn]: The physical drive(s) affected
-Array[X]: Specifies the array ID
-Row[Y]: Specifies the physical drive location
Example
CmdTool2 -PDReplaceMissing -PhysDrv[252,0] -Array0 -Row1 -a0
PhyErrorCounters
Description
Displays the error counter for each PHY.
Syntax
CmdTool2 -PhyErrorCounters -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
Example
CmdTool2 -PhyErrorCounters -a0