Command Line Tool 2 User Guide

Intel
®
RAID Controller Command Line Tool 2 User Guide
Snapshot
-Clean
Description
Clean the recoverable free space on the drives in a virtual drive
Syntax
CmdTool2 -Snapshot -Clean -L[drive] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-L[drive]: specifies the source LD number for the command.
Example
CmdTool2 -snapshot -Clean -L1 -a1
-CreateView
Description
Create a view
Syntax
CmdTool2 -Snapshot -CreateView -SnapshotTime yyyymmdd hh:mm:ss [-viewName NameString]
[-RW|RO|Blocked] [-szXXX]-L[drive] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-L[drive]: specifies the source LD number for the command.
-SnapshotTime yyyymmdd hh:mm:ss: Creates the view on the snapshot with the time stamp
yyyymmdd hh:mm:ss
-viewName NameString: (Optional) Specifies the name of the view.
-RW|RO|Blocked: (Optional) Specifies the access policy of the view.
-szXXX: (Optional) Specifies the size of the view in Mbytes where XXX is adecimal number.