Command Line Tool 2 User Guide

Intel
®
RAID Controller Command Line Tool 2 User Guide
-szXXX: Specifies the size of the view in MB where XXX is a decimal number
Example
CmdTool2 -snapshot -TakeSnapshot -SnapshotName Snapshot_1 -L1 -a1
ShowSummary
Description
Dispalys a summary of system information, controller information, drive information, virtual drive
information, and enclosure information.
Syntax
CmdTool2 -ShowSummary [-f filename] -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
Example
CmdTool2 -ShowSummary -f Summary -a1
VerifySecurityKey
Description
Verify the security key
Syntax
CmdTool2 -VerifySecurityKey -SecurityKey sssssssssss -a[controller]
Parameters
-a[controller]: The RAID controller affected by the command
-SecurityKey sssssssssss: Enters the new security key. The security key is case-sensitive. It must be
between eight and thirty-two characters and contain at least one number, one lowercase letter, one
uppercase letter, and one non-alphanumeric character (e.g. < > @ +). The space character is not
permitted.