Enclosure Management Cabling for Pedestal Systems with Hot-Swap Drive Enclosures

September, 2010
5
SRCSASPH16I
SAS in-band.
No drive LED control cable needed.
RAID card connector: J17 (if you use port 0-7)
and J18 (if you use port 8-15), white
Backplane connector: SES, white
Cable: 3-pin SES
RS2BL080
SAS in-band.
No drive LED control cable needed.
RAID card connector: J11, white
Backplane connector: SES, white
Cable: 3-pin SES
RS2BL040
SAS in-band.
No drive LED control cable needed.
RAID card connector: J11, white
Backplane connector: SES, white
Cable: 3-pin SES
RS2PI008 Not supported. Not supported.
RS2MB044
SAS in-band.
No drive LED control cable needed.
RAID card connector: J1A4, white
Backplane connector: SES, white
Cable: 3-pin SES
RS2SG244
SAS in-band.
No drive LED control cable needed.
RAID card connector: J1C1, white
Backplane connector: SES, white
Cable: 3-pin SES
RS2WG160
SAS in-band.
No drive LED control cable needed.
RAID card connector: J1C1, white
Backplane connector: SES, white
Cable: 3-pin SES
RS2WC080
SAS in-band.
No drive LED control cable needed.
RAID card connector: J7, white
Backplane connector: SES, white
Cable: 3-pin SES
RS2WC040
SAS in-band.
No drive LED control cable needed.
RAID card connector: J7, white
Backplane connector: SES, white
Cable: 3-pin SES
RMS2AF080
SAS in-band.
No drive LED control cable needed.
Option 1:
RAID module connector: J1A1 (SES), white
Backplane connector: SES, white
Cable: 3-pin SES
Option 2:
RAID module connector: J1A2 or J1B2 (SGPIO),
black
Backplane connector: SGPIO, black
Cable: 4-pin SGPIO
RMS2AF040
SAS in-band.
No drive LED control cable needed.
Option 1:
RAID module connector: J1A1 (SES), white
Backplane connector: SES, white
Cable: 3-pin SES
Option 2:
RAID module connector: J1A2 (SGPIO), black
Backplane connector: SGPIO, black
Cable: 4-pin SGPIO