Server Management Guide

Scenarios and Best Practices
102 Intel
®
Server Boards and Server Platforms Server Management Guide
Verb
Is used to
help
Provide information on using SMASH*.
show
Show all the targets, properties, and verbs supported by this target.
version
Show the current version of SMASH*.
Figure 59. SMASH* Target
5.7.4 System1
The system target represents the server/blade. Power control is available on the target .System1, It
contains sol1, sp1, and other sensor monitoring targets. Here sp1 means Service Process Configuration.
5.7.4.1 Supported Properties
The supported properties of the system1 target are as follows:
Table 19. System 1 Target
Property
Task
CurrentPowerStatus
This Read-Only property shows the power status of the system as ON or OFF.
The value of the property is assigned to any of the following values:
ON - If the power status of the system is on, then the value of this property is ON.
OFF - If the power status of the system is off, then the value of this property is OFF.
SysIdSupported
This read only property indicates if System Identification is
SUPPORTED
or
NOT SUPPORTED