Server Management Guide

Scenarios and Best Practices
110 Intel
®
Server Boards and Server Platforms Server Management Guide
to respond to UDP/IP packets or generate LAN alerts. Enetport1 (Ethernet port target) gives the port
address information. Enetport1 contains only one target named lanendpt1.
5.7.8.1 Supported Properties
The supported properties of the target enetport1 are as follows:
Table 21. Target enetport1
Property
Task
macaddress
Address that was received by the activated session. This read only property gives the value of
the MAC address. Mac address is a unique identifier attached to most network adaptors (NICs).
Identity
This read only property gives a brief explanation of the present target and cannot be changed.
5.7.8.2 Supported Verbs
The supported verbs of the Enetport1 target are as follows:
Verb
Is used to
cd
Change from one valid target path to any other valid target path.
exit
Exit from the current SMASH* session.
help
Provide information on using SMASH*.
show
Show all the targets, properties, and verbs supported by this target.
version
Show the current version of SMASH*.
Figure 65. Enetport1 Target