Server Management Guide

Scenarios and Best Practices
Intel
®
Server Boards and Server Platforms Server Management Guide 113
Figure 67. IPENDPT1 Target
5.7.11 Remotesap1
The remotesap1 target will enumerate all the configurable IPs under the containing target. A remote
access server enables users who are not on a local network to access. This does not contains any
targets.
5.7.11.1 Supported Properties
The supported properties of the remotesap1 target are as follows:
Table 23. Remotesap1 target
Property
Task
defaultgatewayaddress
IP address of the gateway. A gateway address is a private address and is the address to
which traffic is sent from the LAN .This is an R/W property. The value of the gateway
can be set as follows:
->Set defaultgatewayip=0.0.0.0
Identity
This read only property gives a brief explanation of the present target and cannot be
changed.