Server Management Guide

Baseboard Management Controller
Intel
®
Server Boards and Server Platforms Server Management Guide 15
Examples on step by step instructions:
1. Update both Intel
®
RMM2 and system’s BMC FW to the latest
2. Use psetup or kiratool to setup Intel
®
RMM2’s IP address (static or DHCP)
3. Use SYSCFG utility to configure BMC users and BMC LAN channel 3 setting:
> syscfg /u 3 admin password # configure user 3’s user name and password
> syscfg /ue 3 enable 3 # enable user 3 on LAN channel 3
> syscfg /up 3 3 admin # assign user 3 with admin privilege on LAN channel 3
> syscfg /c 3 7 always # configure LAN channel 3 access mode to “Always”
4. Configure IPMI forwarding from Intel
®
RMM2’s web GUI as following:
Figure 3. IPMI channel 3 settings on Intel
®
RMM2 navigation web page
NOTE
You can also enable SOL function per your configuration.
5. Restart RMM2 by doing: