Server Management Guide

Baseboard Management Controller
Intel
®
Server Boards and Server Platforms Server Management Guide 43
The Intel
®
Remote Management Module 4 is currently supported on the following Intel
®
server and
workstation boards:
 S1200BTL
 S2400BB
 S2400SC
 S2600CP
 S2600GL
 S2600GZ
 S2600IP
 W2600CR
The Intel
®
RMM4 has two different packages, RMM4 Lite edition (AXXRMM4Lite) and RMM4 full
edition (AXXRMM4).
RMM4 Lite edition box contains Intel
®
Remote Management Module 4 Lite module.
RMM4 full edition box contains the following components:
 Intel
®
Remote Management Module 4 Lite module
 Intel
®
Dedicated Server Management Network Interface Card (NIC) module
 Plastic bag containing screws, metal fastening bracket, PCI slot brackets, and cablings
Intel
®
Dedicated Server Management Network Interface Card (NIC) is able to support 100M or 1G, it
depends on platforms, you have to check this information from platform TPS.
The installation will vary between the chassis configurations. The following sections detail installation
instructions.
CAUTION: INTEL
®
RMM4 LITE AND RMM4 DMN ARE NOT HOT-SWAPPABLE.
BEFORE REMOVING OR REPLACING IT, YOU MUST FIRST TAKE THE SERVER
OUT OF SERVICE, TURN OFF THE SYSTEM BY PRESSING THE POWER BUTTON
AND UNPLUG THE AC POWER CORD FROM THE SYSTEM OR WALL OUTLET
AND WAIT FOR AT LEAST 10 SECONDS BEFORE INSTALLING THE MODULE.
The Intel
®
RMM4 add-on offers convenient, remote KVM access and control through LAN or Internet. It
captures, digitizes, and compresses video and transmits it with keyboard and mouse signals to and from a
remote computer. Remote access and control software runs in the Integrated Baseboard Management
Controller, utilizing expanded capabilities enabled by the Intel
®
RMM4 hardware.