Server Management Guide

Scenarios and Best Practices
80 Intel
®
Server Boards and Server Platforms Server Management Guide
 Confirm the changes by press F10, “Save configuration and Exit”
Figure 39. Save BMC settings
NOTE
BMC LAN Channel setting change only take effect after next reboot by pressing F10 to “Save
configuration and Exit”.
5.4 Remotely Manage the Server through DPCCLI
The Intel
®
Command Line Interface (CLI) console runs on the management console and enables
communication between the management console and the network proxy, which in turn communicates
to the managed server. The Intel
®
Command Line Interface lets you control a server from the command
line rather than from a graphical user interface. You can enter Intel
®
Command Line Interface
commands at a command prompt or from a script file to do the following:
 Remotely power on or off a server or reset the server
 Read sensor values
 Operate remote server in SOL mode