Service Guide

Server System Features
Intel®
Server System SC5650HCBRP Service Guide 1
1 Server System Features
This chapter briefly describes the main features of the Intel
®
Server System SC5650HCBRP. This chapter
provides a photograph of the product, list of the server system features, and diagrams showing the location of
important components, and connections in the server system.
Figure 1. Intel
®
Server System SC5650HCBRP
Table 1. Server System Features
Feature Description
Dimensions
 Pedestal Configuration: 17.8 inches high, 9.256 inches wide, 19 inches deep
 Rack Configuration: 9.256 inches high, 17.6 inches wide, 19 inches deep
Hard Drives
 One expander backplane drive bay for up to six hot-swap SAS/SATA drives at
3GB/s, requires SAS add-in adapter or SAS module card accessory
 Optional 2.5” drive carrier (AXX25DRVADPTR) to install 2.5” hard disk drive
into 3.5” hot-swap hard disk drive bay
Peripherals
 Two multi-mount 5.25-inch peripheral bays
 One 3.5-inch peripheral bay
Control Panel
(dependent on option
selected)
 Front Control Panel
 Intel
®
Local Control Panel (optional)
LEDs and displays
(dependent on option
selected)
 With Front Control Panel
o NIC1 Activity
o NIC2 Activity
o Power/Sleep
o System Status LED
Power Supply
 One 600-W PFC power supply is standard
 Upgradable to full, hot-swap redundancy by adding a second power supply
module.
Cooling
 Two 120-mm system fans (rear fan and PCI zone)