Service Guide

Server System Features
8 Intel
®
Server System SC5650HCBRP Service Guide
the maximum number of drives that can be integrated into the server system. For instructions on installing hard
drives, see “Installing Hot Swap Hard Drive”.
You may purchase an optional 2.5” carrier kit (AXX25DRVADPTR) to install 2.5-inch hard drives into 3.5-inch
hot-swap drive cages.
/
NOTE
The Intel
®
Server System SC5650HCBRP requires SAS add-in card or SAS module card to support hard
drives.
Drive can consume up to 18.4 watts of power each. Drives must be specified to run at a maximum ambient
temperature of 45°C.
The Intel
®
Server System SC5650HCBRP does not support all Serial ATA hard drives. See “Additional
Information and Software” for a web link to a list of supported hardware.
Server Board Connector and Component Locations
Callout Description Callout Description
A
Slot 1, 32-bit/33 MHz PCI, Keying for 5V and
W System Fan 2 Header (6-pin)