Service Guide

System Utilities
Intel® Server System SC5650HCBRP Service Guide 25
CAUTION
DO NOT interrupt the BIOS POST during the first boot after recovery!
Clearing the Password
If the user or administrator password(s) is lost or forgotten, moving the password clear jumper into the “clear”
position clears both passwords. You must restore the password clear jumper to its original position before you
can set a new password(s). The password clear jumper is located on jumper block J1E4.
1. Power down the server. Do not disconnect the power cord.
2. Open the chassis.
3. Move the jumper (J1E4) from the default operating position, covering pins 1 and 2, to the password
clear position, covering pins 2 and 3.