Service Guide

System Utilities
26 Intel
®
Server System SC5650HCBRP Service Guide
Figure 17. Password Clear Jumper
4. Close the server chassis.
5. Power up the server and then press <F2> to enter the BIOS menu to check if the password is cleared.
6. Power down the server.
7. Open the chassis and move the jumper back to its default position, covering pins 1 and 2.
8. Close the server chassis.
9. Power up the server.
The password is now cleared and you can reset it by going into the BIOS setup.
Clearing the CMOS
If you cannot access the BIOS setup screens, you must use the CMOS Clear jumper to reset the configuration
RAM. The CMOS Clear jumper is located on jumper block J1E6.