Service Guide

Hardware Installations and Upgrades
32 Intel
®
Server System SC5650HCBRP Service Guide
Figure 23. Removing Front Bezel Assembly
Installing the Front Bezel Assembly
1. Observe the safety and ESD precautions listed in “Appendix B: Safety Information”.
2. Line up the three clips on the right side of the front bezel assembly with the corresponding slots on the right
side of the chassis (see letter “A” in the following figure). Engage the clips with the slots (see letter “B”).
Rotate the left side of the front bezel assembly towards the chassis (see letter “C”). Snap the two bezel tabs
into the corresponding recesses at the left edge of the chassis front panel (see letter “D”).
3. Reinstall the left side cover. For instructions, see “Installing the Left Side Cover”.
4. Reconnect all peripheral devices and the AC power cable. Power up the server.
Figure 24. Installing Front Bezel Assembly