Service Guide

Hardware Installations and Upgrades
Intel® Server System SC5650HCBRP Service Guide 45
Figure 41. Open PCI Add-in Card Retention Device
5. If it is already not removed, remove the PCI slot shield by pushing the shield out from the inside of the
chassis.
Figure 42. Removing PCI Slot Shield
6. Remove a PCI add-in board from its protective wrapper. Be careful not to touch the components or gold-
edge connectors. Place the board on an anti-static surface. Record the type and serial number of the add-in
board in your equipment log. Set jumpers or switches on the board according to the manufacturer’s
instructions.
7. Hold the PCI add-in board by its top edge or upper corners. Firmly press the add-in board into an expansion
slot on the server board (see letter “A” in the following figure). Close the back panel PCI Add-in Card
Retention Device (see letter “B”).