Service Guide

Hardware Installations and Upgrades
Intel® Server System SC5650HCBRP Service Guide 47
Figure 44. Open PCI Add-in Card Retention Device
5. Disconnect any cables that may be attached to the PCI add-in board that needs to be removed.
6. Firmly grab the PCI add-in board by its top edge or upper corners and remove from the expansion slot on
the server board (see letter “A” in the following figure). Place the removed add-in board in an anti-static
protective wrapper. Close the back panel PCI Add-in Card Retention Device (see letter “B”).
Figure 45. Removing PCI Add-in Card
7. If available, replace the PCI slot shield by pressing the slot shield into the opening on the chassis.