Service Guide

Hardware Installations and Upgrades
58 Intel
®
Server System SC5650HCBRP Service Guide
Figure 63. Removing Fan from Hot Swap Drive Cage
8. Install the new system fan in the snap-in bracket is shown in the following figure.
Figure 64. Installing Fan on Hot Swap Drive Cage
9. Slide the drive cage into the drive bay slot on the chassis. You should hear a click when the blue plastic
retention mechanism locks into place. Be sure to feed the fan cable through the slot first so it exits through
the back of the drive cage. Connect the fan cable to its connector on the server board (System Fan 3
header)