Service Guide

Hardware Installations and Upgrades
60 Intel
®
Server System SC5650HCBRP Service Guide
Figure 66. Removing Power Supply Filler Panel
3. Insert new hot swap power supply module until it clicks into place.
Figure 67. Install Additional Hot Swap Power Supply Module
4. Connect power cable to hot swap power supply.
Replacing a Hot Swap Power Supply Module
WARNING
Hazardous conditions, power supply: Hazardous voltage, current, and energy levels
are present inside the power supply. There are no user-serviceable parts inside it;
servicing of the power supply should be done only by technically qualified personnel.
1. Observe the safety and ESD precautions listed in “Appendix B: Safety Information”.
2. Remove power cable from defective power supply.